Showing all 56 results

PT-DPP-R10 Digital Power Protective System

FEATURES :
  • Digital Power Protective System is designed as a educational trainer & it is used to learn all of conditions which occur in the industry field.
  • It has various protection & measurement elements for a fault monitoring and comprehensive monitoring of an electric power distribution.
  • Event & Fault recording function.
  • Providing IrDA, RS-485 and Fiber Optic communication port.
  • Built in a disturbance generator & provided a program for measuring and analysis.
  • Digital Power Protection System provides a simulation program for prior learning and it consists of a power line and each relay elements for simulation.

PT-ECE-A100 All In One Engineering Lab

FEATURES :
  • Provide measuring equipment : DMM, F/G, OSC, DAQ.
  • It provides various course such as electric, logic, electronics and communication.
  • Providing training contents as regarding each course.
  • It has a troubleshooting function & power protection circuit.
  • Set up module based verified circuit.
  • A bread board built in a trainer and it is used for application experiment.

PT-HVE-SIS Smart Incoming System

FEATURES :
  • Smart Incoming Panel System modularizes the core parts of the distribution and relay system miniaturize the size of the power distribution system.
  • It is able to grasp the complicated configuration, use the commercial power 220VAC and build the insulation system, to be.
  • Real-time monitoring, analysis & control of PC, HMI and smart phone through the exchange of data between PLC & industrial automation S/W is possible, so that preliminary learning of smart switchboard used in industry is possible.
  • In this system, the measurement and management parts are power monitoring, fault detection and system control.
  • Power monitoring monitors power such as voltage, current, power, power factor and frequency. Fault detection detects the phase of voltage and current and detects the operation state.

PT-PS-T100 Electric Installation Measurement Trainer

FEATURES :
  • It is designed to simulate measurement on electrical installation.
  • It is possible to observe and measure for diagnosis or error of an electric installation.
  • Providing training contents such as measuring earth & insulation resistance and load & leakage current.

OPTION

  • Digital Multimeter : 1EA
  • Digital Clamp Meter : 1EA (Including leakage current measurement function)
  • Voltage Detector : 1EA
  • Digital Insulation Meter : 1EA
  • Digital Earth Meter : 1EA
  • Phase Rotation Tester : 1EA

WOW-1013 Logic Circuit Trainer

FEATURES :
  • Logic Circuit diagram is provided on the each experiment module.
  • Magnet is attached to the module and it makes easy to fix a module on the main trainer.
  • Built in a frequency generator & counter.
  • Built in a power protection circuit/
  • It is easy to check working from the LED.

WOW-1028 Basic Electricity/Electronic Circuit Trainer

FEATURES :
  • Providing every analog & digital electronics circuit.
  • A bread board & experiment modules are replacement type.
  • Built in an oscilloscope, multi meter, LCR meter, function generator and power supply (All-In-One)
  • Proving variable DC&AC power supply.
  • Display of an oscilloscope, function generator (Sine, Triangular, Square)
  • Oscilloscope waveform measurement function using PC GUI.
  • Providing 2 digits segment, variable resister, buzzer & speaker.
  • Logic level display using LED.

WS-S100 Sensor Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Communication Cable (USB) : 1EA
  • Test Lead (Banana Plug) : 1 Unit
  • Module Storage Cabinet : 1EA
  • Power Cable : 1EA
  • Monitoring Software : 1 Copy
  • Dust Cover : 1 Set

WSM-1 Electric Machine Exp. Trainer

INTRODUCTION :
  • The equipment consists of a DC machine, a single induction motor, a slip ring motor, a universal motor and brake. According at connection, a DC machine can be used a shunt motor and generator, a compound motor and generator or series motor and generator.
  • A single Induction Motor can be used as a condenser and split-phase motor and a slip-ring motor can be used as a synchronous machine and a wound induction motor. In addition, an universal motor can be used both as a DC and AC and a Brake can be used both as a brake and Dynamo- Meter.
  • According at assemble method, this equipment can be used for a DC, induction or synchronous machine experiment.

OPTION

  • Analog Frequency Meter & DC Volt Meter : 1EA – 45 ~ 65Hz & mV
  • 3 Phase Digital Watt Meter : 1EA – Voltage / Current / Power / Power Factor

WSM-10 DC Shunt Motor & Synchronous Ge Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Dust Cover : 1 Set

OPTION

  • 3 Phase Digital Watt Meter : 1EA
  • DC Power Supply : 1EA – 0 ~ 30V

WSM-12 Dynamometer Exp. Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Test Lead (Banana Plug) : 1 Unit
  • Calibration Device : 1 Unit
  • Power Cable : 1EA
  • Dust Cover : 1EA

OPTION

  • 3 Phase Digital Watt Meter : 1EA

WSM-15 Wound Induction Motor & DC Compound Ge. Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Dust Cover : 1 Set

OPTION

  • 3 Phase Digital Watt Meter : 1EA
  • DC Power Supply : 1EA – 0 ~ 30V
  • Analog Frequency Meter & DC Volt Meter : 1EA – 45 ~ 65Hz & mV

WSM-17 Induction Motor & DC Shunt Ge. Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Dust Cover : 1 Set

OPTION

  • 3 Phase Digital Watt Meter : 1EA
  • DC Power Supply : 1EA – 0 ~ 30V

WSM-24 Transformer Experimental Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Dust Cover : 1EA

OPTION

  • 3 Phase Digital Watt Meter (WSM-24) – Watt Meter (2EA)

WSM-5 Electric Machine Structure Exp. Trainer

INTRODUCTION :
  • This trainer is designed for studying structure of a motor & generator.
  • This trainer has each assemble part such as a rotor, magnetic pole and brush.
  • It is possible to make and operate a motor and generator directly.
  • It consists of several type electric machine.
    – Permanent magnet and field coil DC
    – Generator, rotary field type and rotary type
    – Generator, rotary converter and generator, permanent
    – Magnet&DC motor, synchronous motor&3 phase induction motor
    – Shading coil type 1 phase induction motor

WSM-6 Heavy Current Machine Exp. Trainer

INTRODUCTION :
  • This trainer is designed for studying principle of a motor & generator.
  • It consists of 11 type electric machine and 1 dynamometer and each experiment modules are provided.
  • It is possible to change an electric machine for each experiment.

OPTION

  • AC Ampere Meter Module : 1EA
  • DC Ampere Meter Module : 1EA
  • AC Volt Meter Module : 1EA
  • DC Volt Meter Module : 1EA
  • Analog Frequency Meter & DC Volt Meter : 1EA – 45 ~ 65Hz & mV
  • 3 Phase Digital Watt Meter : 1EA – Voltage / Current / Power / Power Factor

WSM-7 Wound Induction Motor & DC Shunt Ge. Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Dust Cover : 1 Set

OPTION

  • 3 Phase Digital Watt Meter : 1EA
  • DC Power Supply : 1EA – 0 ~ 30V
  • Analog Frequency Meter & DC Volt Meter : 1EA – 45 ~ 65Hz & mV

WST-10 Stepper Motor Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Communication Cable(USB) : 1EA
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Monitoring Software : 1 Copy
  • Dust Cover : 1EA

WST-12 AC Servo Motor Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Communication Cable(USB) : 1EA
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Monitoring Software : 1 Copy
  • Dust Cover : 1EA

WST-23 Power Electronic Trainer (Board Type)

INTRODUCTION :
  • This trainer is a power electronics trainer and they consist of 10 kind of experiment board.
  • They has different item from a diode rectification to PWM inverter.
  • Each board has a gate circuit and load.
  • 10 experiment boards can be used individually.

WST-25 Automatic Control Trainer (Module Type)

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Communication Cable (USB) : 1EA
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Monitoring Software : 1 Copy
  • Dust Cover : 1 Set

OPTION

  • Function Generator : 1EA (1 MHz & Output 3V)

WST-33 Power Electronic Trainer (Module Type)

INTRODUCTION :
  • This is a power electronics trainer and it consists of a working table & frame and experiment modules.
  • This system has a variable experiment from a diode rectification to PWM inverter.

OPTION

  • Oscilloscope Current Probe : 1EA

WST-8 Sequence Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Dust Cover : 1 Set

WST-9 DC Servo Motor Trainer

ACCESSORY :
  • Experiment Manual : 1 Copy
  • Communication Cable(USB) : 1EA
  • Test Lead (Banana Plug) : 1 Unit
  • Power Cable : 1EA
  • Monitoring Software : 1 Copy
  • Dust Cover : 1EA