Showing all 22 results

Biofuels (GT 6000)

FEATURES :
  • Alternative Energy Generation.
  • Energy and Power.
  • Biomass and Biofuels.
  • Small Scale Bio-Energy Production.

Reinforced with Hands-on Labs

Clean Electrons (GT 1500)

FEATURES :

The GT-1500 Clean Electron Generation Panel provides students an introductory hands-on interactive experience with the 3 leading sources of alternative energy generation technologies.

  • Basic Wind Turbine Operation
  • Basic Solar Power Operation
  • Basic Fuel Cell Operation
  • Combining Wind & Solar Power Systems

Reinforced with Hands-on Labs

Energy Auditing (GT 7500)

FEATURES :
  • Sustainable Architecture
  • Residential & Commercial Structures
  • Energy & Power
  • Energy & Conservation
  • Passive Solar Systems
  • Green Building
  • Building Codes & Compliance
  • Understanding Blueprints

Reinforced with Hands-on Labs

Fuel Cell (GT 3000)

FEATURES :
  • Alternative Energy Generation.
  • Energy and Power.
  • Fuel Cells.
  • Building Codes & Compliance.

Reinforced with Hands-on Labs

Hydro Power (GT 5000)

FEATURES :
  • Alternative Energy Generation.
  • Energy and Power.
  • Hydro Power.
  • Building Codes & Compliance.

Reinforced with Hands-on Labs

PCTK-100

FEATURES :
  • The power conversion module is designed as an experiment and practice system for electronics and is suitable for students beginning with DC-DC Converter.
  • Circuit operation can be understood through manufacturing practice for each module.
  • It is possible to conduct experiment and practice to check change in output voltage of BUCK BOOST and CUK Modules by adjusting PWM Gen output DUTY cycle.
  • The textbook is edited and provided in the order of theory, manufacturing practice and report.

PT-ESS-TB Energy Storage System

FEATURES :
  • Designed to learn saving surplus energy & using them in emergency.
  • Composition of Li-ion & DELC Cell & operating software.
  • It is controlled by RS-485 communication & possible to monitor each block.
  • Built in safety device.

PT-SPS-N10 Solar Photovoltaic System

FEATURES :
  • To study principle & composition of a solar photovoltaic system.
  • Selective 2-Way light source.
  • Possible to practice 2 kind of inverter.
  • Provide a systematic training contents.
  • Package Analysis Program (GREEN PV AP SPS N10)

SEGT-1000

FEATURES :
  • Helps users understand solar energy generating system by combining light source, charging controllers, converter, inverter, etc as a module.
  • Provides customized power generation system designing practices for manufacturing commercial products or practical training.
  • Every module is controlled through computer and has test pins for users to measure characteristics of each circuit.
  • Every module can be powered by battery during practices.
  • Power efficiency of each module is displayed on GUI in real time.
  • Incident angle of light source can be changed.
  • Each chapter of text book has objective of practice, theories, practices and report.

Solar Panel (GT 1000)

FEATURES :
  • Alternative Energy Generation.
  • Energy and Power.
  • Passive Solar Systems.
  • Design & Installation of Residential Scale Photovoltaic Systems.
  • Troubleshooting PV Systems
  • Building Codes & Compliance
  • Understanding Blueprints

Reinforced with Hands-on Labs

Sustainable Conservation (GT 2500)

FEATURES :

The GT-2500 Sustainable Conservation Technology Panel provides students an introductory hands-on interactive experience with multiple energy design, monitoring & auditing processes & technologies

  • Energy Auditing.
  • Environmental Monitoring.
  • Sustainable Architecture.
  • Green Structure Design.

Reinforced with Hands-on Labs

WEGT-1000 Blade

FEATURES :
  • Designed to allow indoor experiments for the principle of wind power generation
  • The system is composed of blower, blade, load module, wind¬† speed meter, DC/AC inverter, battery and quick charger
  • For the purpose of safety, load and inverter modules are contained in a steel enclosure
  • Blade support frame is provided to endure the wind pressure when wind is applied to the blade by the blower.
  • Real-time wind speed measurement using a wind speed meter.
  • The load module is equipped with an LCD for real-time checking of blade RPM.
  • The DC/AC inverter module is equipped with an LCD to check voltage and current .
  • Each chapter of the training textbook is composed of theory, practice and report.
  • Manufacturing practice for power conversion and measurement of circuit characteristics

WEGT-1000 Hand

FEATURES :
  • Designed to allow indoor experiments for the principle of windnpower generation
  • The system is composed of generator, load, DC/DC converter, DC/AC inverter, FlyBack inverter, battery and quick charger
  • For the purpose of safety, load and inverter modules are contained in a steel enclosure.
  • Experiments are conducted under the same environment as wind power generation by applying force to the generator with hand instead of blade in order to exclude noise involved in wind power generation experiments
  • Check real-time power generation vs. hand force
  • Power conversion practice using DC/DC converter andnDC/AC inverter
  • Designed to test and check the magnitude of energy generated
  • Each chapter of the training textbook is composed of theory, practice and report.
  • Manufacturing practice for power conversion and measurement of circuit characteristics

Wind Power (GT 2000)

FEATURES :
  • Alternative Energy Generation.
  • Energy and Power.
  • Wind Power Technology.
  • Wind Turbine Design.
  • Design & Installation of Residential Scale Wind Turbine Systems
  • Troubleshooting Wind Turbine Systems
  • Building Codes and Compliance
  • Understanding Blueprints

Reinforced with Hands-on Labs

WOW-3027 Smart Grid Trainer

FEATURES :
  • Designed to study a principle, structure & main technology of a smart grid system.
  • Composition of a generation part, power transmission & transformation of electric energy part, power exchange part, energy management system (EMS) and power demand part.
  • An operation diagram is built with SCADA & it is used to easy understand working together of each part.
  • Saving & analysing data of generation & consumption.
  • Providing various experiment.
  • PC GUI can be used to monitor & control data of primary, secondary, power transmission & transmission of electric energy.

OPTION

  • Solar Power Generation Module
  • Wind Power Generation Module

WOW-3029 Smart Power Management Trainer

FEATURES :
  • It is designed to study flow of energy : Generation/Power transmission & transformation of electric energy/Power consumption.
  • Built in meters to measure voltage, current & power.
  • Serial/Parallel connection of solar cells.
  • Real time monitoring for energy generation.
  • Controlling power consumption for house, factory & building.
  • Possible to monitor using PC GUI & App.

WOW-3045 Hydrogen Fuel Cell Trainer

FEATURES :
  • It is designed for studying a principle of a hydrogen fuel cell.
  • To learn that hydrogen to electricity using water electrolysis.
  • Experiment for generation effect of a hydrogen fuel cell.
  • Experiment for load usage using generation electricity of a hydrogen fuel cell.
  • Providing a 15W electrolyzer & fuel cell stack.
  • Collecting a data using ZigBee.

WS-SGIC Solar Power Generation System (Module Type)

INTRODUCTION :
  • This trainer is designed to learn a principle of a solar power generation system.
  • It has a grid-connected and stand-alone inverter and it is used for studying both inverter system.
  • It is possible to adjust an incidence angle of light source.
  • Data Collect Monitoring Program : Curve Tracer (V-I & V-P Graph) & PV Simulation

WS-SGIP10 Basic Energy Conversion Trainer

INTRODUCTION :
  • This trainer is designed to learn an energy conversion which is generated by a solar cell.
  • It is possible to adjust an incidence angle of light source.
  • Data Collect Monitoring Program : Curve Tracer (V-I & V-P Graph) & PV Simulation

WS-WFG1 Wind Power Generation Structure System

INTRODUCTION :
  • This trainer is designed to learn a principle and structure of a wind power generator.
  • Wind power generator is assembly type and we need to assemble a rotor and stator of a generator.

WS-WFG2 Wind Power Generation System (Module Type)

INTRODUCTION :
  • This trainer is designed to learn a principle and structure of a wind power generator and it is composed of experiment modules.
  • Wind power generator is assembly type and we need to assemble a rotor and stator of a generator.