PT-HVE-SIS Smart Incoming System

FEATURES :
  • Smart Incoming Panel System modularizes the core parts of the distribution and relay system miniaturize the size of the power distribution system.
  • It is able to grasp the complicated configuration, use the commercial power 220VAC and build the insulation system, to be.
  • Real-time monitoring, analysis & control of PC, HMI and smart phone through the exchange of data between PLC & industrial automation S/W is possible, so that preliminary learning of smart switchboard used in industry is possible.
  • In this system, the measurement and management parts are power monitoring, fault detection and system control.
  • Power monitoring monitors power such as voltage, current, power, power factor and frequency. Fault detection detects the phase of voltage and current and detects the operation state.

Description

SPECIFICATION (MAIN PANEL) :
POWER PART
  • MCB : 6EA
  • ACC220V Output (B-Jack) : 7EA
  • DC110V Output (B-Jack) : 7EA
  • ELD Output (B-Jack) : 9EA
  • ACB Output (B-Jack) : 3EA
  • VCB Output (B-Jack) : 7EA
AUTOMATION PART
  • PLC (Programmable Logic Controller)
  • Incoming Panel Control via Input/Output/Communication Module
  • PLC Interworking Practice via Digital Input/Output
  • HMI (Human Machine Interface)
CIRCUIT PART
  • Power flow path practice using the lamp
  • Power transfer and switchover using ATS
  • Incoming panel/Transformation/Distribution Grid Confirm
  • Training the electrics location & function using power grid
SPECIFICATION (VCB/ACB PANEL) :
DIGITAL MULTI-FUNCTION POWER PROTECTION RELAY
  • Prior training of Power protection relay
  • Random failure, Failure detection, recovery practice using CTT/PTT point & circuit tester
  • Digital monitoring of various incoming panel factor
OPERATION DISPLAY LAMP
  • VCB/ACB make break status
PTT/CTT
  • Random failure, Failure detection, Recovery practice using Circuit tester and PTT/CTT port
ALARM
  • Alarm confirm via Square lamp through digital multi-function power protection relay factor operation
SPECIFICATION (CONTROL PANEL) :
LBS, WHM PART
  • LBS open practice via CAM S/W
  • LBS status confirm via Lamp
  •  LBS operating process using HMI
  • Measurement power consumption amount using PT & CT
ELR PART
  • Detect short circuit per line
  • Warning or contact point output
  • Square Lamp : 10EA
ATS PART
  • Main power/Emergency power switchover practice
  • Artificial switchover using Auto/Manual Mode
  • Keep power supply even though blackout or low voltage through ATS system and emergency power system
  • Power flow line confirm at ATS operation via 3 phase circuit lamp
CAM S/W PART
  • CAM S/W for VCB, ACB, Local/Remote
  • Control practice by wiring with 3 phase circuit
  • Practice circuit breaker and power flow path confirm via Lamp
  • ACB, VCB process confirm via HMI

DOCUMENT

PT-HVE-SIS Smart Incoming System